QS supplementary provisions for the hottest food p

2022-10-20
  • Detail

QS Supplementary Provisions on food packaging notice on Supplementary Provisions on market access of products such as plastic packaging containers and tools for food No. 73 [2008] of the quality and Technical Supervision Bureau of all provinces, autonomous regions and municipalities directly under the central government, the examination authority: in order to further promote the market access of products such as plastic packaging containers and tools for food, According to the measures for the implementation of the regulations of the people's Republic of China on the administration of production licenses for industrial products (Order No. 80 of the director of the General Administration of quality supervision, inspection and Quarantine of the people's Republic of China) and the needs of work, after our research, we have decided to supplement and revise the detailed rules for the examination of production licenses for products such as plastic packaging containers and tools for food (see the annex for details). It is hereby notified. This notice shall come into force as of the date of promulgation. Annex of May 8th, 2008: detailed rules for the examination of the production license of plastic packaging containers and tools for food, serial number, clause number, relevant clause contents, modification and supplement contents 1. On site inspection methods 2.2 enterprise environment and site requirements 2.2.8 add the following contents: (1) production of non composite film bags, composite film bags, disposable plastic tableware, sheets The requirements of enterprise disinfection facilities for containers are: hand washing facilities should be inductive or pedal type to avoid cross contamination; Disinfection should be done with alcohol, etc. The buffer zone should be disinfected regularly, such as ultraviolet radiation. The work clothes should include hats, gloves (if it is inconvenient to work with gloves, the hands should be disinfected regularly during work), full-body work clothes, shoes or foot covers, and should be closed for production. At the same time, ventilation and dust-proof facilities suitable for closed production should be provided. Among them, manufacturers of non composite film bags, composite film bags, disposable plastic tableware and other products should use wind showers, and manufacturers of sheets, containers and other products can use wind curtains; (2) Enterprises producing melamine tableware, plastic vegetable boards, woven bags and other products should at least use hand sanitizer to wash their hands, and should at least have dust removal facilities such as dust removal rollers. It should have a dressing room and wear clean work clothes, as well as dust-proof ventilation facilities suitable for production; (3) Production facilities do not include production equipment, but mainly refer to facilities other than production equipment and directly related to the normal operation of production, such as handling facilities, ventilation facilities, material transportation and other facilities. Workplace refers to the space and area to meet production needs; (4) The cooling water in direct contact with the product during the production process should be clean tap water that meets the health standards. 2 6.2 factory inspection 6.2.1 supplementary content: the enterprise inspection room should meet the corresponding inspection environmental requirements. 3 (I) detailed rules for the examination of the production license of non composite membrane bags 6 Necessary delivery inspection equipment table 3 item 14 aluminized film for packaging supplementary content: if the inner layer of aluminized film products for packaging produced by the enterprise is CPP material, the necessary delivery inspection equipment of the enterprise does not include oven and steel ruler. 4.7.1 sampling method supplementary content of sampling method: products with different substrates (BOPET, BOPP, CPP) should be sampled separately. Item 4 of Table 4 polyethylene blown film for liquid packaging is modified: the sampling base is modified from 400 rolls to 150kg ~ 1t. 5.7.2 inspection items: Amendment to item 15 of Table 2 in attachment 2 of qsjh [2007] No. 77: the elastic modulus is removed from the certification inspection index of ordinary biaxial tensile polypropylene film. 6 supplementary content: when making bags for non composite membrane products, enterprises should formulate enterprise standards. The certification inspection refers to the certification inspection items of photographic film. 7 (II) detailed rules for the examination of the production license of composite film bags 7.1.4 in Table 4, paper-based composite materials for aseptic packaging of liquid food and other types of multilayer composite food packaging films and bags are modified: the product sampling base is modified from 50000m to 50000 ㎡. 8.7.2 inspection items table 13 inspection items of multi-layer composite food packaging films and bags supplementary content: toluene diamine inspection items are added to the certification inspection and key control inspection. 9. The supplementary content of item 15 in Table 2 of attachment 2 of quality inspection and food supervision letter [2007] No. 77: the inspection items of caprolactam are added to the certification inspection and key control inspection of biaxially stretched polyamide (nylon) (inner layer is PA). 10 (III) detailed rules for the examination of production license of sheet products 7.1 modification of sampling method: the sampling quantity of sheet is modified from two 10 meter samples per roll to two 2.5 ㎡ samples per roll. 11 (IV) detailed rules for the examination of production license of woven bag products 7.1 supplementary content of sampling method: if the enterprise applies for polypropylene (PP) composite plastic woven bags and woven bag products at the same time, the composite plastic woven bags cover the woven bags during license inspection. 12 7.2 supplementary contents of inspection items: items 7 in Table 4 and 9 in Table 5 are added after evaporation residue (65% ethanol) (only polyethylene material). 13 (V) detailed rules for the examination of the production license of container products 1. Supplementary contents of the scope of licensed products: (1) if the products produced by the enterprise meet the requirements of bb/t "combined anti-counterfeiting bottle caps", such products are listed in other types of plastic bottle caps. (2) If the products produced by the enterprise meet the requirements of qb/t polyolefin injection packaging barrels, such products are included in the plastic bottles with the rapid development of the automotive industry and the increasing competition in the industry. Supplementary contents of necessary delivery inspection equipment: plastic milk bottles, plastic drinking cups (POTS), plastic bottles (blanks) products determine whether the oven is necessary delivery inspection equipment according to the product uses and inspection items specified in the enterprise standards. 15 7.1 sampling method table 4 Item 4 polycarbonate (PC) drinking water tank modification: the sampling quantity is changed from 20 (with the same number of covers) to 122 (with the same number of covers). 167.2 modification and supplement of inspection items table 12: for the first three inspection items in Table 12, (1) the certification inspection items of plastic milk bottles are drop performance, thermal stability, periodic power transmission qualitative, and sealing performance. (2) The certificate issuing inspection of plastic bottles and plastic drinking cups (POTS) will not do drop performance; As for the sealing performance, the enterprise must indicate whether its products have sealing performance on its product instructions. If the enterprise promises that the products have sealing performance requirements, the inspection shall be carried out when issuing the certificate; With regard to thermal stability, enterprises must clearly indicate the operating temperature range of their products on their product manuals. When the enterprise indicates on its product or product specification that the service temperature of the product is 40 ℃ or below, the product is exempted from this certification inspection; If the enterprise does not mark the temperature warning on its 5g products or product manuals, or mark the temperature above 40 ℃ on its products or product manuals, the majority of users are welcome to visit our products for this certification inspection according to the requirements of P56 in the detailed rules and mark the maximum use temperature in its manuals. (3) Plastic bottle blanks are free from drop performance, thermal stability and sealing performance tests. (4) For plastic milk bottles, plastic drinking cups (POTS) and plastic bottles (blanks), if the certified products are made of polyethylene terephthalate (PET), the evaporation residue (water) will be added to the certification inspection and key control inspection items. 171819 other QS labels shall be implemented in accordance with the provisions of the document No. [2007] 77 of the quality inspection and food supervision letter, and the relevant QS label requirements in the examination rules shall be invalidated

Copyright © 2011 JIN SHI